Chain of Custody: Why a Lab Records Who Touched the Sample
A result is only as meaningful as the sample it belongs to. Chain of custody is the record that ties the two together, and its absence leaves a number with no provable owner.
A chain of custody is the continuous written record of who held a sample, when it changed hands, where it was kept and what state it was in at each point. A laboratory keeps it so that a result can be tied to one specific physical sample and to nothing else. It does not make a measurement more accurate. It makes the measurement attributable.
That distinction matters. A chromatogram can be clean, well integrated and correctly reported, and still be of no use if nobody can show which vial produced it. This article covers what the record contains, how it is built, what a gap in it means, and what it cannot show. It builds on the short section in the pillar post on peptide testing.
What a chain of custody is
The term comes from evidence handling. In forensic work, a sample is only admissible if its path from collection to analysis can be shown without a gap. Analytical and pharmaceutical laboratories borrowed the same discipline, because the underlying problem is identical. A result is a statement about a sample. If the sample cannot be established, the statement has nothing to attach to.
A chain of custody is therefore not one document. It is a set of linked records that together answer four questions.
- Who held the sample at each stage.
- When each transfer or action took place.
- Where the sample was stored or moved.
- What condition it was in, including whether its packaging was intact.
If all four can be answered for every interval between submission and reporting, the chain is continuous. If any interval is unaccounted for, the chain is broken at that point, however short the interval was.
Why a result depends on it
An analytical result has two parts. The first is the measurement: a retention time, a peak area, a mass, a percentage. The second is the claim about what was measured. The instrument produces the first part. Only the records can support the second.
Consider what the record is protecting against. A sample can be mislabelled. Two samples can be swapped. A vial can be topped up, diluted, or replaced. Material can degrade in transit and be reported as if it had arrived in its original state. None of these events change how the instrument behaves. The chromatogram looks the same. Only documentation separates a trustworthy result from an unverifiable one.
This is also why a certificate should be read as describing the sample submitted and nothing beyond it. The chain of custody is what gives the phrase the sample submitted a precise meaning.
What the record contains
Practice varies between laboratories, but a complete custody record generally holds the following.
- A unique sample identifier. One code, assigned once, that belongs to one container and is never reused.
- Description of what was received. Container type, label text as it appeared, quantity, physical appearance, and the stated identity from the submitter.
- Date and time of receipt, and the name or initials of the person who received it.
- Condition on arrival. Whether packaging was intact, whether any seal was unbroken, and any visible damage, leakage or change in appearance.
- Storage location and conditions while the sample waited for analysis.
- Each transfer between people, rooms or instruments, with a date, time and signature or electronic equivalent.
- What was done to the sample. Weighing, dissolution, dilution and aliquoting, each tied to the same identifier.
- Disposition. Whether remaining material was retained, returned or destroyed.
The records are only useful if they were made at the time of the event. A custody form completed afterwards from memory is a reconstruction, and it carries the weaknesses of one.
Identifiers and tamper-evident seals
Two physical controls sit under the paperwork.
Unique identifiers
Every sample receives its own identifier on arrival. The identifier then follows the sample and every portion drawn from it: the weighed powder, the prepared solution, the vial in the autosampler. When an identifier appears on the raw data file, the preparation notes and the final certificate, the three can be matched. When it does not, the match depends on trust.
Good identifiers are unambiguous and are not reused. A supplier lot number is a useful piece of descriptive information, but it is not a substitute for the laboratory identifier, because several submitted vials can share one lot number. Batch and lot numbers identify manufacturing history. A sample identifier identifies the physical object that was tested.
Tamper-evident sealing
A tamper-evident seal is a closure that shows visible damage or alteration if it is opened. Its value is narrow and specific. It shows whether the container was accessed after the seal was applied. It does not show what was in the container when it was sealed, and it does not show who applied it.
For that reason a seal is recorded rather than merely used. A seal number is written down at sealing, checked at receipt, and noted again at each opening. An intact seal with a matching number supports continuity. A missing, damaged or mismatched seal is a recorded event that requires explanation.
Receipt, storage and handling inside the laboratory
For the laboratory, custody begins at receipt. Everything before that point is outside its direct knowledge. It can inspect the package and record what it finds, but it cannot verify who prepared the vial or how it was kept before arrival.
This creates a real boundary, and a careful laboratory states it. Custody inside the laboratory can be documented in full. Custody before receipt rests on what the submitter reports and what the packaging shows. The two should not be presented as the same level of assurance.
Once inside, the practical risks are ordinary ones. Samples wait. They sit at room temperature, in a refrigerator or in a freezer, and peptides can degrade under poor storage. The custody record therefore includes storage location and conditions, so that a degradation product can be interpreted correctly. A peak that appears after a sample sat warm for a week has a different meaning from one present at receipt. Without the storage record, the two cannot be distinguished. Further background on stability is in peptide storage and degradation.
What a gap or absence means for a result
A missing or broken chain does not make a result false. It makes the result unsupported as a statement about a particular sample. Those are different things, and the difference is worth stating carefully.
If the chain is absent, three consequences follow.
- Identity cannot be shown. The result may describe the right material, or a different vial, or a different batch. The record cannot say which.
- Integrity cannot be shown. The sample may have been altered, contaminated or degraded between collection and analysis, and there is no log to rule that out.
- The result cannot be defended. If it is later questioned, by a buyer, a regulator or another laboratory, there is no documentation to answer with. Reproducing the number is not enough. The sample behind it has to be shown to be the same one.
The correct response to a documented break is also not to discard the data. A laboratory working to good practice records the break, assesses its effect, and either reports with a clear qualification or declines to report the result as representative. What it should not do is leave the gap unmentioned.
The same reasoning explains why a certificate with no sample identifier, no receipt date and no description of what was received is hard to rely on. Nothing on the page connects it to a particular vial. Fake certificates of analysis often fail exactly here, because a fabricated page can reproduce a plausible number far more easily than a plausible record.
What a chain of custody cannot show
A continuous chain is necessary for a defensible result. It is not sufficient for a meaningful one. Several limits apply.
- It does not establish quality. A perfectly documented sample can still be impure. Custody says which sample was tested, not how good it was.
- It does not establish that the sample was representative. If one vial from a larger batch is tested, the chain proves that vial was tested. It says nothing about the other vials. This is the central point in single vial versus batch testing.
- It does not cover the period before receipt. What happened between manufacture and submission is documented only as far as the submitter documented it.
- It does not remove measurement uncertainty. Every method has limits, and a documented sample is still measured within those limits.
- It is only as honest as its entries. A record can be falsified. Its value comes from being contemporaneous, attributable and checkable, not from being written down.
Purity is a statement about composition. It is not a statement about safety, and custody does not change that.
What accreditation standards generally expect
Laboratories that work to the international standard for testing and calibration competence, ISO/IEC 17025, are expected to have documented procedures for handling test items. In general terms, that covers their receipt, identification, protection, storage and retention, and a system of identification that prevents items being confused. The standard also requires that deviations on receipt, such as a sample that is damaged or does not match its description, be recorded, and that the customer be consulted where appropriate.
The underlying principle is traceability. A reported result should be traceable to the sample, the method, the equipment and the person responsible. Custody records are one of the main ways that principle is made concrete. This is a general description of what such a standard asks of laboratories that adopt it. Anyone relying on a specific laboratory's accreditation should check its scope directly with the accrediting body, since accreditation applies to defined activities and not to a laboratory as a whole.
What a submitter can do to keep the chain intact
The laboratory controls its own interval. The submitter controls the interval before it. A few habits keep that earlier interval defensible.
- Record what you sent. Note the product name, supplier lot number, quantity, date and the identity you believe the vial holds.
- Photograph the sample as sent, including the label and any seal, before packing.
- Seal the package and keep the seal number or a photograph of it.
- Ship under suitable conditions and note them. Temperature during transit affects what can be inferred later.
- Keep the tracking record and the date of dispatch.
- Label the sample clearly so the laboratory identifier can be matched to your own records.
The practical steps are set out in how to submit peptides for testing. Novagen is a third-party analytical laboratory. It reports what was measured in the sample submitted, and it publishes a verifiable certificate register at novagenlaboratories.com. Current quoted turnaround is 21 days from receipt of samples, and questions can be sent to admin@novagenlaboratories.com.
The short version is plain. A result without a chain of custody is a number without an owner. A result with one is a number that can be traced to a sample, within the limits that every measurement has.
Common questions
- What is chain of custody in laboratory testing?
It is the documented, unbroken record of who handled a sample, when each transfer happened, where the sample was kept, and what condition it was in at each step. Its purpose is to let anyone reading a result confirm which physical sample it describes.
- Why does a lab record who touched the sample?
Because a measurement describes only the material that was in the instrument. If the record of handling is incomplete, nobody can show that the material measured was the material submitted. Recording each handler makes the sample traceable and makes any mix-up, loss or tampering detectable.
- What happens if the chain of custody is broken?
The measurement itself may still be technically correct, but its link to the original sample can no longer be demonstrated. A careful laboratory records the break, investigates it, and either qualifies the result or declines to report it as representative of the submitted sample.
- Does chain of custody prove a peptide is pure or safe?
No. Chain of custody concerns identity and traceability of the sample, not its quality. Purity describes composition, and neither purity nor custody is a statement about safety.
- Is a tamper-evident seal the same as a chain of custody?
No. A seal is one tool within the chain. It shows whether a container was opened after sealing. The chain of custody is the wider record of identifiers, signatures, dates, storage and condition that surrounds the seal.